Mopar 2013–2018 Ram 6.7L Cummins Complete Filter Kit — Genuine OEM Fuel & Oil Filter Set (68157291AA, 68197867AB & 05083285AA)

One trip to the parts counter, one full service done right. This complete kit bundles all three filters your 2013–2018 Ram 6.7L Cummins needs for a proper maintenance interval — engine-mounted fuel filter, frame-mounted water separator, and oil filter — all genuine Mopar, all matched to factory spec. No mixing and matching aftermarket parts and hoping they seal correctly.

Why This Matters

The 6.7L Cummins runs a high-pressure common-rail fuel system paired with a turbocharged oil circuit — both are unforgiving of contamination. Skipping a filter, or swapping in a mismatched aftermarket part, is one of the most common ways owners end up with premature injector wear or oil-pressure issues. This kit takes the guesswork out of a full service by giving you every filter the job calls for, sourced from the same OEM spec your truck was built with.

OEM vs. Aftermarket

What's Included

• (1) 68157291AA — Engine-mounted primary fuel filter
• (1) 68197867AB — Frame-mounted fuel/water separator
• (1) 05083285AA — Genuine Mopar engine oil filter
• Full set of sealing O-rings for a clean, leak-free install

Compatibility — Please Confirm Before Ordering

This kit is the correct OEM replacement for:

• Ram 2500 / 3500 — 2013–2018
• Ram 4500 / 5500 — 2013–2018

Note: 2019 and newer Ram HD trucks use a different frame-mounted fuel filter (68436631AA) in place of the 68197867AB. If your truck is a 2019 model or newer, check our separate 2019–2024 kit listing instead — or send us your VIN and we'll confirm the right kit before you order.

Signs You Need This

Time for a full service if you notice:

• A "Service" or maintenance-due message on your instrument cluster
• Rough or slow cold starts
• Reduced power or hesitation under load, especially while towing
• It's been roughly 15,000 miles or 12 months since your last filter change

Why Buy From Us

• Guaranteed genuine parts — sourced directly, never counterfeit
• One order, full service done — no chasing down individual filters
• In-stock and ready to ship — fast turnaround, no drop-ship delays
• VIN-checked fitment support — not sure if your truck is a 2018 or a 2019 "Classic"? Send us your VIN and we'll confirm before you order

Call to Action

One order. A complete service. Zero fitment guesswork. Add the genuine Mopar complete filter kit to your cart and keep your 6.7L Cummins running the way it was built to.

FAQ

Q: Do I need to replace both fuel filters every service, or just one? A: Both. The frame-mounted filter handles water separation and coarse debris; the engine-mounted filter does the fine filtration. If one is due, the other almost always is too.

Q: What tools do I need to install this kit? A: A 1-1/8" (28mm) socket for the fuel filter caps, and a standard oil filter wrench for the oil filter.

Q: Will this fit a 2012 Ram or a 2019+ Ram? A: No to both. 2010–2012 trucks use a single-filter fuel system, and 2019+ trucks use a different frame-mounted filter (68436631AA). This kit is built specifically for the 2013–2018 dual-filter fuel system.

Q: How do I know for sure which generation my truck is? A: Check the 10th character of your VIN, or send it to us and we'll confirm your exact fitment.