Mopar 2019–2024 Ram 6.7L Cummins Complete Filter Kit — Genuine OEM Fuel & Oil Filter Set (68157291AA, 68436631AA & 05083285AA)

One order, one complete service. This kit bundles all three filters your 2019–2024 Ram 6.7L Cummins needs for a full maintenance interval — the engine-mounted fuel filter, the frame-mounted water separator, and the oil filter — all genuine Mopar, matched to the correct updated fuel system your truck actually has. No hunting down individual parts, and no risk of grabbing the older-generation filter by mistake.

Why This Matters

Starting with the 2019 model year, Ram updated the 6.7L Cummins fuel filtration hardware — the frame-mounted filter changed from the earlier design to the current 68436631AA. Getting this part number right matters: the older-generation filter can be a poor fit or seal improperly on the newer housing. This kit takes that risk off the table by giving you the exact three filters engineered for your truck's actual fuel and oil systems.

OEM vs. Aftermarket

What's Included

• (1) 68157291AA — Engine-mounted primary fuel filter
• (1) 68436631AA — Frame-mounted fuel/water separator (2019+ design)
• (1) 05083285AA — Genuine Mopar engine oil filter
• Full set of sealing O-rings for a clean, leak-free install

Compatibility — Please Confirm Before Ordering

This kit is the correct OEM replacement for:

• Ram 2500 / 3500 — 2019–2024
• Ram 4500 / 5500 — 2019–2024

Note: 2013–2018 Ram HD trucks use a different frame-mounted fuel filter (68197867AB) rather than the 68436631AA in this kit. If your truck is a 2018 or earlier model, check our separate 2013–2018 kit listing instead — or send us your VIN and we'll confirm the right kit before you order.

Signs You Need This

Time for a full service if you notice:

• A fuel or oil service-due message on your instrument cluster
• The "Water in Fuel" light — moisture has been detected in the frame-mounted filter bowl
• Hesitation or fuel rail pressure fluctuation under heavy towing
• It's been roughly 15,000 miles or 12 months since your last filter change

Why Buy From Us

• Guaranteed genuine parts — sourced directly, never counterfeit
• One order, full service done — every filter you need for a standard service in a single kit
• In-stock and ready to ship — fast turnaround, no drop-ship delays
• VIN-checked fitment support — not sure if your truck takes the 2013–2018 or 2019–2024 filter? Send us your VIN and we'll confirm before you order

Call to Action

One order. A complete service. The correct filters for your truck's actual fuel system. Add the genuine Mopar complete filter kit to your cart and keep your 6.7L Cummins protected the way it was built to be.

FAQ

Q: Why does the fuel kit contain two filters? A: The dual-filter fuel system uses a water separator at the frame and a fine "polishing" filter at the engine. Both should be changed together for proper protection.

Q: What tools do I need to install this kit? A: A 1-1/8" (28mm) socket for both fuel filter caps, and a standard oil filter wrench for the oil filter.

Q: Will this fit a 2018 or earlier Ram? A: No. 2013–2018 trucks use a different frame-mounted filter (68197867AB). This kit is built specifically for the updated 2019–2024 fuel system.

Q: How do I know for sure which generation my truck is? A: Check the 10th character of your VIN, or send it to us and we'll confirm your exact fitment before you order.